FOCUS 1.6 ECOBOOST 180 61 PLATE Hi and thanks in advance for responses as title says got eml light on so run a icarsoft i920 came up with p0238 turbo boost sensor A circuit high assumed this was a MAP issue so changed the MAP MANIFOLD ABSOLUTE PRESSURE but to no avail light still comes on clear c Symptoms of a P0033 engine code may include: Reduced engine performance. Whining or rattling noises from the turbocharger or turbo pipes. Excessive smoke from the exhaust. Fouled spark plugs. Elevated engine and/or transmission temperature. Abnormal hissing noises from the turbocharger wastegate and/or hoses. Ford Model: Focus Mk3 Titanium Navigator. Ford Year: 2013. UK/Ireland Location: Surrey. Posted March 28, 2016. My 1.6tdci boosts to 2 bar (28 psi) flat out at max acceleration. Normal hard accel is 1.8 bar, idle around -0.6bar. Quote.

I got lumbered with a Ford Focus 1.6 TDCi today, the customer complaint was that the engine is seriously holding back and will not accelerate over 40 MPH. Difficult one today because I had no scanner to check live data or fault codes, so I asked the boss to check it using his scanner.

This is triggered when the desired and actual turbo vane positions don’t match during the learn procedure. The P003A code can be caused by a variable geometry turbo (VGT) turbocharger that’s out of calibration, vane position sensor failure, turbocharger failure, or turbocharger vane control actuator solenoid failure. Ford Focus Club. Focus Mk3 1.6tdci TMAP sensor readings DV6C. Hi all, I’m helping a friend revive a severely neglected and abused 2012 1.6 diesel with a DV6C engine. We have slowly been working through a list of faults/problems. I looks like it’s been run for a long time with a P0299 fault causing the DPF to become blocked. . 186 184 308 306 46 27 263 329 119

ford focus 1.6 tdci turbo boost solenoid location